To setup Netgear Orbi router, follow these steps:

• Connect the Router: Plug the Orbi router into a power outlet and connect the main Orbi unit to your modem using the Ethernet cable provided.

• Power Up: Turn on both the Orbi router and modem, ensuring they are both powered up.

• Connect to Wi-Fi: On your device, look for the Orbi Wi-Fi network name (SSID) and connect to it.

• Access Orbi Settings: Open a browser and type in “orbilogin com” or the IP address “192.168.1.1” to access the router's settings page. Follow the on-screen instructions to complete the setup.

• Set Up Your Network: Create a Wi-Fi name and password for your network.

Once your Orbi router is successfully set up, if you experience issues such as Lorex Camera Offline, try rebooting the router and checking the camera’s Wi-Fi connection. For more information, you can visit our site or contact our technical expert through live chat.

To fix your Lorex camera offline, first check the power supply and ensure the camera is plugged in and receiving power. Next, verify your internet connection; ensure your router is functioning properly and that other devices are connected. If using Wi-Fi, check the Lorex Camera Offline status in the app and reconnect the camera to your network. Restart both the camera and your router to refresh the connection. If the problem persists, update the firmware for both your camera and NVR. For further assistance, refer to the user manual or contact customer support through the Lorex website or live chat.